Home › BODY ELECTRICAL › OTHER SYSTEM › CIGARETTE LIGHTER

CIGARETTE LIGHTER > REMOVAL

for Preparation Click here



1. REMOVE SWITCH BASE


B278245
  1. Detach the 9 claws and guide.

    HINT:
    If the claws are difficult to detach, detach the claws from the back of the switch base.

  1. Disconnect the connectors and remove the switch base.



2. REMOVE CIGARETTE LIGHTER COVER


    B085605E06
  1. Detach the 2 claws and remove the cover.



3. REMOVE CIGARETTE LIGHTER ASSEMBLY


    E003722
  1. Rotate the cigarette lighter socket to disengage the cigarette lighter bezel stay's notch from the socket hole.

    NOTICE:
    Do not damage the bulb terminal.

  1. Pull out the socket halfway.

  1. Align the socket with the stay's grooves and remove the socket.