Home › ENGINE ยท 1KD-FTV › ENGINE CONTROL SYSTEM › INTAKE AIR TEMPERATURE SENSOR (w/ Glow Plug Controller)

INTAKE AIR TEMPERATURE SENSOR (w/ Glow Plug Controller) > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    A254063
  1. Remove the 3 bolts, 2 cap nuts and No. 1 engine cover.
    Text in Illustration 
    V100136
    Cap Nut



2. REMOVE INTAKE AIR TEMPERATURE SENSOR
  1. Disconnect the intake air temperature sensor connector.



    A272519
  1. Using a 22 mm deep socket wrench, remove the intake air temperature sensor.

    HINT:
    Replace the intake air temperature sensor if it is deformed, cracked or malfunctioning. It is not necessary to replace the intake air temperature sensor each time the intercooler is replaced.