ENGINE UNIT > REPAIR |
| 1. BORE CYLINDER |
Prepare 4 new O/S pistons.
| Item | Specified Condition |
| O/S 0.50 | 96.42 to 96.45 mm (3.796 to 3.797 in.) |
| O/S 0.75 | 96.67 to 96.70 mm (3.806 to 3.807 in.) |
| O/S 1.00 | 96.92 to 96.95 mm (3.816 to 3.817 in.) |
![]() |
Using a micrometer, measure the piston diameter according to the following conditions: 1) measure at a right angle to the piston center line, and 2) measure at the indicated distance from the piston head.
| *1 | Size Mark |
| *2 | Piston Pin Hole Inside Diameter Mark |
| *3 | Front Mark (Arrow) |
| *4 | Distance |
Calculate how much each cylinder needs to be rebored:
Bore and hone the cylinders to the calculated dimensions.