Home › ENGINE ยท 2TR-FBE › EMISSION CONTROL › HEATED OXYGEN SENSOR

HEATED OXYGEN SENSOR > REMOVAL

for Preparation Click here


CAUTION:
  1. Wear protective gloves when removing the heated oxygen sensor.
  2. The exhaust pipe assembly is extremely hot immediately after the engine has stopped.
  3. Confirm that the exhaust pipe assembly has cooled down before removing it.



1. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)
  1. Disconnect the heated oxygen sensor connector.



    A112118E01
  1. Using SST, remove the heated oxygen sensor.

    SST
    09224-00010