INTERCOOLER (w/ Glow Plug Controller) > INSTALLATION |
| 1. INSTALL INTERCOOLER ASSEMBLY |
Install a new gasket and the intake air connector with the 4 bolts.
Install the intercooler with the 4 bolts.
Install a new No. 2 air hose and then tighten the 2 hose clamps.
Tighten the 2 hose clamps of the No. 1 air hose.
| 2. INSTALL INTAKE AIR TEMPERATURE SENSOR |
Using a 22 mm deep socket wrench, install a new gasket and the intake air temperature sensor.
Connect the intake air temperature sensor connector.
| 3. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY |
Install the engine cover with the 3 bolts and 2 cap nuts.