Home › ENGINE ยท 2KD-FTV › EMISSION CONTROL › VACUUM REGULATING VALVE

VACUUM REGULATING VALVE > INSTALLATION

for Preparation Click here



1. INSTALL ELECTRIC VACUUM REGULATING VALVE ASSEMBLY (for EGR)
  1. Install the electric vacuum regulating valve together with the bracket with the 2 bolts.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }

  1. Connect the 2 vacuum hoses.

  1. Connect the connector.



2. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY
  1. Attach the 4 claws to the pins of the cover bracket to install the engine cover.