VACUUM REGULATING VALVE > INSPECTION |
| 1. INSPECT ELECTRIC VACUUM REGULATING VALVE ASSEMBLY (for EGR) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 1 - 2 | 20°C (68°F) | 11 to 13 Ω |
| 1 - Body ground 2 - Body ground | 10 kΩ or higher |
Check the operation of the E-VRV.
When a vacuum of 67 kPa (500 mmHg, 19.7 in.Hg) is applied to port F, check that air flows from port E to the filter.

![]() |
Apply battery voltage across terminals 1 and 2.
Check that air flows from port E to port F.
If the result is not as specified, replace the electric EGR control valve assembly.