Home › ENGINE ยท 2KD-FTV › EMISSION CONTROL › VACUUM REGULATING VALVE

VACUUM REGULATING VALVE > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    A099256E05
  1. Detach the 4 claws from the pins of the engine cover bracket and remove the No. 1 engine cover.
    Text in Illustration 
    *1
    No. 1 Engine Cover
    *a
    Claw
    *b
    Pin



2. REMOVE ELECTRIC VACUUM REGULATING VALVE ASSEMBLY (for EGR)


    A212373
  1. Disconnect the connector.

  1. Disconnect the 2 vacuum hoses.

  1. Remove the 2 bolts and electric vacuum regulating valve together with the bracket.

    NOTICE:
    Do not remove the electric vacuum regulating valve from the bracket.