OUTER REAR VIEW MIRROR > INSPECTION |
| 1. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH |
![]() |
Disconnect the mirror connector.
Apply battery voltage and check operation of the mirror.
| Measurement Condition | Specified Condition |
| Battery positive (+) →Terminal 9 (MV) Battery negative (-) → Terminal 8 (M+) | Turns upward |
| Battery positive (+) → Terminal 8 (M+) Battery negative (-) → Terminal 9 (MV) | Turns downward |
| Battery positive (+) → Terminal 4 (MH) Battery negative (-) → Terminal 8 (M+) | Turns left |
| Battery positive (+) → Terminal 8 (M+) Battery negative (-) → Terminal 4 (MH) | Turns right |
| *a | Component without harness connected (Outer Rear View Mirror Assembly LH) |
![]() |
For each position: Disconnect the battery, set the mirror position by hand, connect the battery, and check the retractable mirror movement.
| Measurement Condition | Mirror Position | Specified Condition |
| Battery positive (+) → Terminal 7 (MR) Battery negative (-) → Terminal 2 (MF) | Forward position A | Moves from A to retracted position E |
| Battery negative (-) → Terminal 7 (MR) Battery positive (+) → Terminal 2 (MF) | Forward position A | Does not move |
| Battery positive (+) → Terminal 7 (MR) Battery negative (-) → Terminal 2 (MF) | Position between forward position A and driving position C | Moves from B to retracted position E |
| Battery negative (-) → Terminal 7 (MR) Battery positive (+) → Terminal 2 (MF) | Position between forward position A and driving position C | Moves from B to forward position A |
| Battery positive (+) → Terminal 7 (MR) Battery negative (-) → Terminal 2 (MF) | Driving position C | Moves from C to retracted position E |
| Battery negative (-) → Terminal 7 (MR) Battery positive (+) → Terminal 2 (MF) | Driving position C | Does not move |
| Battery positive (+) → Terminal 7 (MR) Battery negative (-) → Terminal 2 (MF) | Position between driving position C and retracted position E | Moves from D to retracted position E |
| Battery negative (-) → Terminal 7 (MR) Battery positive (+) → Terminal 2 (MF) | Position between driving position C and retracted position E | Moves from D to driving position C |
| Battery positive (+) → Terminal 7 (MR) Battery negative (-) → Terminal 2 (MF) | Retracted position E | Does not move |
| Battery negative (-) → Terminal 7 (MR) Battery positive (+) → Terminal 2 (MF) | Retracted position E | Moves from E to driving position C |
| *a | Component without harness connected (Outer Rear View Mirror Assembly LH) |
![]() |
Check the side turn light assembly.
Apply battery voltage to the terminals of the connector, and check the illumination condition.
| Tester Connection | Specified Condition |
| Battery positive (+) → Terminal 10 Battery negative (-) → Terminal 6 | Side turn light illuminates |
| *a | Component without harness connected (Outer Rear View Mirror Assembly LH) |
| 2. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH |
![]() |
Disconnect the mirror connector.
Apply battery voltage and check operation of the mirror.
| Measurement Condition | Specified Condition |
| Battery positive (+) →Terminal 9 (MV) Battery negative (-) → Terminal 8 (M+) | Turns upward |
| Battery positive (+) → Terminal 8 (M+) Battery negative (-) → Terminal 9 (MV) | Turns downward |
| Battery positive (+) → Terminal 4 (MH) Battery negative (-) → Terminal 8 (M+) | Turns left |
| Battery positive (+) → Terminal 8 (M+) Battery negative (-) → Terminal 4 (MH) | Turns right |
| *a | Component without harness connected (Outer Rear View Mirror Assembly RH) |
![]() |
For each position: Disconnect the battery, set the mirror position by hand, connect the battery, and check the retractable mirror movement.
| Measurement Condition | Mirror Position | Specified Condition |
| Battery positive (+) → Terminal 7 (MR) Battery negative (-) → Terminal 2 (MF) | Forward position A | Moves from A to retracted position E |
| Battery negative (-) → Terminal 7 (MR) Battery positive (+) → Terminal 2 (MF) | Forward position A | Does not move |
| Battery positive (+) → Terminal 7 (MR) Battery negative (-) → Terminal 2 (MF) | Position between forward position A and driving position C | Moves from B to retracted position E |
| Battery negative (-) → Terminal 7 (MR) Battery positive (+) → Terminal 2 (MF) | Position between forward position A and driving position C | Moves from B to forward position A |
| Battery positive (+) → Terminal 7 (MR) Battery negative (-) → Terminal 2 (MF) | Driving position C | Moves from C to retracted position E |
| Battery negative (-) → Terminal 7 (MR) Battery positive (+) → Terminal 2 (MF) | Driving position C | Does not move |
| Battery positive (+) → Terminal 7 (MR) Battery negative (-) → Terminal 2 (MF) | Position between driving position C and retracted position E | Moves from D to retracted position E |
| Battery negative (-) → Terminal 7 (MR) Battery positive (+) → Terminal 2 (MF) | Position between driving position C and retracted position E | Moves from D to driving position C |
| Battery positive (+) → Terminal 7 (MR) Battery negative (-) → Terminal 2 (MF) | Retracted position E | Does not move |
| Battery negative (-) → Terminal 7 (MR) Battery positive (+) → Terminal 2 (MF) | Retracted position E | Moves from E to driving position C |
| *a | Component without harness connected (Outer Rear View Mirror Assembly RH) |
![]() |
Check the side turn light assembly.
Apply battery voltage to the terminals of the connector, and check the illumination condition.
| Tester Connection | Specified Condition |
| Battery positive (+) → Terminal 10 Battery negative (-) → Terminal 6 | Side turn light illuminates |
| *a | Component without harness connected (Outer Rear View Mirror Assembly RH) |