Home › ENGINE ยท 1GR-FE › IGNITION › IGNITION COIL AND SPARK PLUG

IGNITION COIL AND SPARK PLUG > REMOVAL

for Preparation Click here



1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


3. REMOVE V-BANK COVER


    A112983
  1. Remove the 2 nuts and V-bank cover.



4. REMOVE AIR CLEANER ASSEMBLY


    A075595
  1. Disconnect the vacuum hose.

  1. Disconnect the MAF meter connector.

  1. Remove the 2 wire harness clamps.



    A075596
  1. Loosen the 2 hose clamps.

  1. Remove the 2 bolts and air cleaner.



5. REMOVE IGNITION COIL
  1. Disconnect the connector.



    B012294E06
  1. Remove the bolt and ignition coil.



6. REMOVE SPARK PLUG
  1. Using a 16 mm spark plug wrench, remove the 6 spark plugs.