OIL PUMP > INSPECTION |
| 1. INSPECT OIL PUMP RELIEF VALVE |
![]() |
Coat the valve with the engine oil and check that it falls smoothly into the valve hole by its own weight.
If it does not, replace the relief valve. If necessary, replace the oil pump assembly.
| 2. INSPECT OIL PUMP ROTOR SET |
![]() |
Place the drive and driven rotors into the timing chain cover with the marks facing upward.
![]() |
Inspect the rotor tip clearance.
Using a feeler gauge, measure the clearance between the drive and driven rotor tips.
![]() |
Inspect the rotor side clearance.
Using a feeler gauge and precision straightedge, measure the clearance between the rotors and straightedge, as shown in the illustration.
Inspect rotor body clearance.
![]() |
Using a feeler gauge, measure the clearance between the driven rotor and body.