COMPRESSOR (for 1KD-FTV) > DISASSEMBLY |
| 1. REMOVE COOLER BRACKET |
![]() |
Remove the screw and cooler bracket.
| 2. REMOVE MAGNET CLUTCH ASSEMBLY |
![]() |
Model code KUN51L-IKMSY, KUN51L-IKPSY
Clamp the cooler compressor in a vise between aluminum plates.
Connect the battery to the magnet clutch assembly as shown in the illustration to fix the hub and rotor in place.
Wrap the drive belt around the rotor and securely hold it in place by hand.
Remove the bolt, magnet clutch hub and magnet clutch washer(s).
![]() |
except Model code KUN51L-IKMSY, KUN51L-IKPSY:
Clamp the cooler compressor in a vise.
Using SST, hold the magnet clutch hub.
Remove the bolt, magnet clutch hub and magnet clutch washer(s).
![]() |
Using a snap ring expander, remove the snap ring and magnet clutch rotor.
Detach the connector clamp.
![]() |
Using a snap ring expander, remove the snap ring and magnet clutch stator.