COMPRESSOR (for 2TR-FE) > DISASSEMBLY |
| 1. REMOVE COOLER BRACKET |
![]() |
Detach the clamp.
Remove the screw and cooler bracket.
| 2. REMOVE MAGNET CLUTCH ASSEMBLY |
![]() |
Type A:
Clamp the cooler compressor in a vise between aluminum plates.
Using SST, hold the magnet clutch hub.
Remove the bolt, magnet clutch hub and magnet clutch washer(s).
![]() |
Type B:
Clamp the cooler compressor in a vise between aluminum plates.
Connect the battery to the magnet clutch assembly as shown in the illustration to fix the hub and rotor in place.
Wrap the drive belt around the rotor and securely hold it in place by hand.
Remove the bolt, magnet clutch hub and magnet clutch washer(s).
![]() |
Using a snap ring expander, remove the snap ring and magnet clutch rotor.
![]() |
Using a snap ring expander, remove the snap ring and magnet clutch stator.