Home › TRANSMISSION ยท A750F AUTOMATIC TRANSMISSION › AUTOMATIC TRANSMISSION SYSTEM (for 1KD-FTV without i-ART)

AUTOMATIC TRANSMISSION SYSTEM (for 1KD-FTV without i-ART) > TERMINALS OF ECU

for Preparation Click here


HINT:
The standard voltage at each TCM terminal is shown in the table below.
In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".
Use the illustration below as a reference for the ECU terminals.


TCM

C214981E11


Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
T35-5 (BATT) - T19-1 (E1)
L - BR
Battery (for measuring battery voltage and for TCM memory)
Always
11 to 14 V
T19-12 (NSW) - T19-1 (E1)
L-Y - BR
PNP switch signal
  1. Ignition switch ON
  2. Shift lever in P or N
Below 1 V
  1. Ignition switch ON
  2. Shift lever not in P or N
11 to 14 V
T19-11 (STA) - T19-1 (E1)
B-Y - BR
Starter signal
Cranking
6 V or higher
T36-9 (R) - T19-1 (E1)
R-Y - BR
R shift position switch signal
  1. Ignition switch ON
  2. Shift lever in R
11 to 14 V
  1. Ignition switch ON
  2. Shift lever not in R
Below 1 V
T36-8 (D) - T19-1 (E1)
G-Y - BR
D shift position switch signal
  1. Ignition switch ON
  2. Shift lever in D or 4
11 to 14 V
  1. Ignition switch ON
  2. Shift lever not in D or 4
Below 1 V
T36-13 (4) - T19-1 (E1)
G-O - BR
4 shift position switch signal
  1. Ignition switch ON
  2. Shift lever in 4
11 to 14 V
  1. Ignition switch ON
  2. Shift lever not in 4
Below 1 V
T36-12 (3) - T19-1 (E1)
L - BR
3 shift position switch signal
  1. Ignition switch ON
  2. Shift lever in 3
11 to 14 V
  1. Ignition switch ON
  2. Shift lever not in 3
Below 1 V
T36-11 (2) - T19-1 (E1)
G-R - BR
2 shift position switch signal
  1. Ignition switch ON
  2. Shift lever in 2 or L
11 to 14 V
  1. Ignition switch ON
  2. Shift lever not in 2 or L
Below 1 V
T36-10 (L) - T19-1 (E1)
GR-L - BR
L shift position switch signal
  1. Ignition switch ON
  2. Shift lever in L
11 to 14 V
  1. Ignition switch ON
  2. Shift lever not in L
Below 1 V
T19-18 (S1) - T19-1 (E1)
GR - BR
S1 solenoid signal
Ignition switch ON
11 to 14 V
1st or 2nd gear
11 to 14 V
3rd, 4th or 5th gear
Below 1 V
T19-17 (S2) - T19-1 (E1)
W-L - BR
S2 solenoid signal
Ignition switch ON
Below 1 V
2nd or 3rd gear
11 to 14 V
1st, 4th or 5th gear
Below 1 V
T19-16 (SR) - T19-1 (E1)
G - BR
SR solenoid signal
Ignition switch ON
Below 1 V
5th gear
11 to 14 V
1st gear
Below 1 V
T19-9 (SL1+) - T19-8 (SL1-)
GR - V
SL1 solenoid signal
Engine idling
Pulse generation
T19-7 (SL2+) - T19-6 (SL2-)
W - R-W
SL2 solenoid signal
Engine idling
Pulse generation
T19-20 (SLT+) - T19-19 (SLT-)
G-Y - L-B
SLT solenoid signal
Engine idling
Pulse generation
T19-22 (SLU+) - T19-21 (SLU-)
B - Y
SLU solenoid signal
4th gear (lock-up) or 5th gear (lock-up)
Pulse generation
T19-25 (THO1) - T19-23 (E2)
L - G
No. 1 ATF temperature sensor signal
No. 1 ATF temperature: 115°C (239°F) or higher
Below 1.5 V
T19-24 (THO2) - T19-23 (E2)
BR - G
No. 2 ATF temperature sensor signal
No. 2 ATF temperature: 115°C (239°F) or higher
Below 1.5 V
T35-14 (STP) - T19-1 (E1)
G-W - BR
Stop light switch signal
Brake pedal is depressed
7.5 to 14 V
Brake pedal is released
Below 1.5 V
T19-3 (NT+) - T19-2 (NT-)
V - P
Speed sensor NT signal
Engine idling (shift lever in P or N)
Pulse generation
(See waveform 1)
T19-30 (SP2+) - T19-29 (SP2-)
R - G
Speed sensor SP2 signal
Vehicle speed 20 km/h (12 mph)
Pulse generation
(See waveform 2)
T36-15 (L4) - T19-1 (E1)
G-W - BR
L4 shift position switch signal
  1. Ignition switch ON
  2. Transfer not in L4
11 to 14 V
  1. Ignition switch ON
  2. Transfer in L4
Below 1.5 V
T36-16 (TFN) - T19-1 (E1)
W-G - BR
N shift position switch signal
  1. Ignition switch ON
  2. Transfer not in N
11 to 14 V
  1. Ignition switch ON
  2. Transfer in N
Below 1.5 V
T35-6 (IG2) - T19-1 (E1)
B-O - BR
Ignition switch
Ignition switch ON
11 to 14 V
T35-25 (SPD1) - T19-1 (E1)
V-R - BR
Vehicle speed signal
Vehicle speed 20 km/h (12 mph)
Pulse generation
(See waveform 3)
T35-21 (CAN+) - T19-1 (E1)
V - BR
CAN communication line
Ignition switch ON
Pulse generation
(See waveform 4)
T35-20 (CAN-) - T19-1 (E1)
P - BR
CAN communication line
Ignition switch ON
Pulse generation
(See waveform 5)


    C162170E01
  1. Using an oscilloscope, check waveform 1.
    Reference 
    Terminal No. (Symbol)
    Tool Setting
    Condition
    T19-3 (NT+) - T19-2 (NT-)
    1 V/DIV., 2 msec./DIV.
    Engine idling (shift lever in P or N)



  2. C161208E01
  3. Using an oscilloscope, check waveform 2.
    Reference 
    Terminal No. (Symbol)
    Tool Setting
    Condition
    T19-30 (SP2+) - T19-29 (SP2-)
    2 V/DIV., 20 msec./DIV.
    Vehicle speed 20 km/h (12 mph)



  4. C216837E02
  5. Using an oscilloscope, check waveform 3.
    Reference 
    Terminal No. (Symbol)
    Tool Setting
    Condition
    T35-25 (SPD1) - T19-1 (E1)
    2 V/DIV., 20 msec./DIV.
    Vehicle speed 20 km/h (12 mph)



  6. C161206E01
  7. Using an oscilloscope, check waveform 4.
    Reference 
    Terminal No. (Symbol)
    Tool Setting
    Condition
    T35-21 (CAN+) - T19-1 (E1)
    1 V/DIV., 10 msec./DIV.
    Ignition switch ON



  8. C161207E01
  9. Using an oscilloscope, check waveform 5.
    Reference 
    Terminal No. (Symbol)
    Tool Setting
    Condition
    T35-20 (CAN-) - T19-1 (E1)
    1 V/DIV., 10 msec./DIV.
    Ignition switch ON