Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM

DTC    B15A0    LAN Master Malfunction

DTC    B15AD    Navigation Processor Malfunction

DTC    B15B0    Display Screen Malfunction

DTC    B15B2    Digital TV Tuner Malfunction

DTC    B15B3    Radio Tuner Malfunction

DTC    B15B5    DVD(changer) mechanical malfunction


DESCRIPTION

These DTCs are stored when a malfunction occurs in the navigation receiver assembly.

DTC No.
DTC Detection Condition
Trouble Area
B15A0
When either condition below is met:
  1. Bus malfunction
  2. EEPROM error
  3. DSP malfunction
Navigation receiver assembly
B15AD
When one of the conditions below is met:
  1. A short to ground, short to +B or open occurs in the gyro signal circuit
  2. Gyro sensor malfunction
  3. GPS receiver malfunction
B15B0
Picture circuit (TFT unit) malfunction
B15B2
RF/IF malfunction
B15B3
Tuner malfunction
B15B5
When one of the conditions below is met:
  1. Mechanism drive signal malfunction
  2. Load/Eject malfunction
  3. Read mechanism malfunction
  4. Mechanical malfunction

INSPECTION PROCEDURE

1.CHECK FOR DTC
  1. Clear the DTCs (Click here).

  1. Recheck for DTCs and check if the same DTCs are output again (Click here).

    OK:
    No DTCs are output.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK

USE SIMULATION METHOD TO CHECK (Click here)