Home › SERVICE SPECIFICATIONS › SERVICE SPECIFICATIONS › 2TR-FBE FUEL

2TR-FBE FUEL > SERVICE DATA



FUEL SYSTEM (for Fuel Pressure) 
Fuel pressure
: at idle
338 to 348 kPa (3.4 to 3.5 kgf/cm2, 49 to 50 psi)
Fuel pressure
: Remains as specified for 5 minute after engine stopped
147 kPa (1.5 kgf/cm2, 21 psi) or higher

FUEL INJECTOR 
Fuel injector
Resistance: 11. 6 to 12.4 Ω at 20° (68°F)
Injection volume
95 to 115 cm3 (5.8 to 7.0 cu, in.) in 5 seconds
Difference between each injector
20 cm3 (1.2 cu, in.) or less

SOLENOID VALVE (for Fuel Cut Control) 
Tester Connection
Condition
Specified Condition
1 - 2
18 to 28°C (64 to 82°F)
20 to 22 Ω
1 - Body ground
Always
10 kΩ or higher
2 - Body ground

SOLENOID VALVE (for Fuel Injection Volume Control) 
Tester Connection
Condition
Specified Condition
1 - 2
18 to 28°C (64 to 82°F)
20 to 22 Ω
1 - Body ground
Always
10 kΩ or higher
2 - Body ground

FUEL PUMP (for Fuel Main Tank) 
Tester Connection
Condition
Specified Condition
4 - 5
20°C (68°F)
0.2 to 3.0 Ω

FUEL PUMP (for Fuel Sub Tank) 
Tester Connection
Condition
Specified Condition
1 - 2
20°C (68°F)
0.2 to 3.0 Ω

FUEL SENDER GAUGE ASSEMBLY (for Fuel Main Tank) 
Tester Connection
Condition
Specified Condition
1 - 2
F
13.5 to 16.5 Ω
Between E and F
13.5 to 418.2 Ω
(Gradually changes)
E
401.8 to 418.2 Ω