Home › BODY › SEAT › REAR NO. 2 SEAT ASSEMBLY

REAR NO. 2 SEAT ASSEMBLY > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedures for the RH side and LH side.
  2. The procedures listed below are for the RH side.



1. INSTALL REAR SEAT LOCK STRIKER
  1. Install the 2 lock strikers with the 4 bolts.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }

  1. Install the floor carpet.



2. INSTALL REAR NO. 2 SEAT ASSEMBLY
  1. Fully tilt the seatback forward.



    B089771E01
  1. Place the seat onto the lock striker.

    NOTICE:
    Be careful not to damage the vehicle body.

  1. Tighten the bolt on the rear side of the seat.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }

  1. Tighten the bolt on the front side of the seat.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }

  1. Fully lock the seat to the lock striker.

    HINT:
    Confirm that the seat is firmly locked to the lock striker.



3. INSTALL REAR SEAT FRONT BRACKET COVER RH


B085728E01
  1. Attach the hook to install the bracket cover.

  1. Install the screw.



4. INSTALL REAR SEAT REAR BRACKET COVER RH
  1. Attach the hook to install the bracket cover.

  1. Install the screw.

  1. Return the seatback to the upright position.