Home › BODY › SEAT › REAR NO. 1 SEAT ASSEMBLY (for RH Side)

REAR NO. 1 SEAT ASSEMBLY (for RH Side) > REMOVAL

for Preparation Click here



1. REMOVE REAR SEAT CUSHION HINGE COVER LH


    B089775E01
  1. Using a clip remover, remove the clip.

  1. Using a screwdriver, detach the 2 claws and remove the hinge cover.

    HINT:
    Tape the screwdriver tip before use.



2. REMOVE REAR SEAT CUSHION HINGE COVER RH

HINT:
Use the same procedures described for the LH side.



3. REMOVE REAR NO. 1 SEAT ASSEMBLY


    B089776E01
  1. Fully tilt the seatback forward.

  1. Remove the 2 bolts.

  1. Unlock the seat locks by pulling the reclining remote control lever knob in the direction of the arrow in the illustration. Then fold the seat as shown in the illustration.



    B089772E01
  1. Remove the 2 nuts and seat.

    NOTICE:
    Be careful not to damage the vehicle body.