REAR NO. 1 SEAT ASSEMBLY (for LH Side) > INSTALLATION |
| 1. INSTALL REAR NO. 1 SEAT ASSEMBLY |
![]() |
Place the seat in the cabin.
Fully fold the seat forward and install the seat with the 2 nuts.
Fully lock the seat to the vehicle body.
![]() |
Tighten the 2 bolts on the front side in the order indicated in the illustration.
Return the seatback to the upright position.
| 2. INSTALL REAR SEAT CUSHION HINGE COVER LH |
![]() |
Attach the 2 claws to install the hinge cover.
Install the clip.
| 3. INSTALL REAR SEAT CUSHION HINGE COVER RH |
| 4. INSPECT AND ADJUST SEAT SLIDE ADJUSTER LOCKS (w/ Slide) |
During sliding operation of the seat, check that the left and right adjusters move together smoothly and lock simultaneously.
If the seat adjusters do not lock simultaneously, loosen the seat fixation bolts and nuts to adjust the adjuster's position.