Home › BODY › EXTERIOR › BACK DOOR OUTSIDE GARNISH

BACK DOOR OUTSIDE GARNISH > INSTALLATION

for Preparation Click here


HINT:
A bolt without a torque specification is shown in the standard bolt chart (Click here).



1. INSTALL BACK DOOR OUTSIDE GARNISH
  1. Attach the 2 clips to install the back door outside garnish.

  1. w/ Rear View Monitor System:
    Install the nut.

  1. w/o Rear View Monitor System:
    Install the 3 nuts.



2. INSTALL REAR TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)
  1. Install the rear television camera assembly with the 2 nuts.

  1. Connect the connector.



3. INSTALL BACK DOOR OUTSIDE HANDLE
  1. Install the back door outside handle with the 2 nuts.



4. INSTALL BACK DOOR TRIM BOARD ASSEMBLY
  1. Attach the 16 clips to install the back door trim board.