CLUTCH MASTER CYLINDER > REMOVAL |
| 1. DRAIN CLUTCH FLUID |
| 2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY |
![]() |
Detach the 2 claws, 3 clips and 3 guides and remove the lower instrument panel finish panel.
| 3. REMOVE COMBINATION METER ASSEMBLY |
| 4. DISCONNECT CLUTCH RESERVOIR HOSE |
![]() |
Using pliers, grip the claws of the clip and slide the clip, and then disconnect the clutch reservoir hose.
| 5. DISCONNECT CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE |
![]() |
Using a union nut wrench, disconnect the tube.
| 6. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY |
Remove the clutch pedal (Click here).
Remove the 2 nuts, clutch master cylinder assembly and gasket.
| 7. REMOVE CYLINDER PUSH ROD CLEVIS |
Loosen the lock nut, and then remove the clevis.
Remove the lock nut from the master cylinder.