Home › RESTRAINTS › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY

REAR SEAT INNER BELT ASSEMBLY > INSTALLATION

for Preparation Click here


HINT:
A bolt without a torque specification is shown in the standard bolt chart (Click here).



1. INSTALL REAR NO. 2 SEAT INNER BELT ASSEMBLY RH (w/ Rear No. 2 Seat)


B089697E01
  1. Install the seat belt with the nut as shown in the illustration.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not overlap the anchor part of the seat belt and the protruding parts of the floor panel.



2. INSTALL REAR NO. 2 SEAT INNER BELT ASSEMBLY LH (w/ Rear No. 2 Seat)
  1. Install the seat belt with the nut as shown in the illustration.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not overlap the anchor part of the seat belt and the protruding parts of the floor panel.



3. INSTALL REAR NO. 1 SEAT BELT ASSEMBLY INNER LH


B089850E02
  1. Install the seat belt with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    The anchor part of the seat belt must not overlap the protruding part.



4. INSTALL REAR NO. 1 SEAT RECLINING COVER LH


    B089780E01
  1. Attach the 3 claws to install the reclining cover.

  1. Install the screw.



5. INSTALL REAR SEAT LAP TYPE BELT ASSEMBLY LH


B120607E02
  1. Install the seat belt LH with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not overlap the anchor part of the seat belt and protruding parts of the seat.



6. INSTALL REAR SEAT LAP TYPE BELT ASSEMBLY CENTER


B120606E02
  1. Install the seat belt center with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not overlap the anchor part of the seat belt and protruding parts of the seat.



7. INSTALL REAR NO. 1 SEAT CUSHION COVER RH

NOTICE:

  1. B125789E01
  2. Be careful not to damage the cover.
  3. When installing the hog rings, avoid wrinkling the cover.

  1. Except TASA made:
    Using hog ring pliers, install the seat cushion cover to the seat cushion pad with 9 new hog rings.

  1. TASA made:
    Using hog ring pliers, install the seat cushion cover to the seat cushion pad with 4 new hog rings.

  1. Install the seat cushion cover (with pad) to the seat cushion frame.

    HINT:
    Make sure that the stopper band is not inside the cushion frame.



8. INSTALL REAR NO. 1 SEAT RECLINING COVER RH


    B089782E01
  1. Attach the 4 claws to install the reclining cover.

  1. Install the screw.



9. INSTALL RECLINING ADJUSTER RELEASE HANDLE RH


    B086040E01
  1. Install the release handle with the screw.



10. INSTALL REAR NO. 1 SEAT BELT ASSEMBLY INNER RH


B089849E02
  1. Install the seat belt with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not overlap the anchor part of the seat belt and protruding parts of the seat.



11. INSTALL REAR NO. 1 SEAT RECLINING COVER LH


    B089780E01
  1. Attach the 3 claws to install the reclining cover.

  1. Install the screw.