Home › RESTRAINTS › SEAT BELT › REAR SEAT OUTER BELT ASSEMBLY

REAR SEAT OUTER BELT ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT REAR NO. 1 SEAT BELT ASSEMBLY OUTER RH


B081499E01

NOTICE:
Do not disassemble the retractor.

  1. When the inclination of the retractor is 15°or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.
    If the operation is not as specified, replace the belt.



2. INSPECT REAR NO. 2 SEAT BELT ASSEMBLY OUTER RH (w/ Rear No. 2 Seat)


B081499E01

NOTICE:
Do not disassemble the retractor.

  1. When the inclination of the retractor is 15°or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.
    If the operation is not as specified, replace the belt.