Home › SUSPENSION & AXLE › SUSPENSION › REAR LOWER ARM

REAR LOWER ARM > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedures for the RH side and LH side.
  2. The procedures listed below are for the LH side.



1. REMOVE REAR WHEEL


2. DISCONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY
  1. Disconnect the No. 3 parking brake cable from the parking brake shoe lever LH and backing plate LH.

    1. Disconnect the No. 3 parking brake cable from the parking brake shoe lever (Click here).

    2. Remove the 2 bolts and disconnect the No. 3 parking brake cable from the backing plate.



  1. Remove the No. 3 clip.


    C237699E01


    Text in Illustration 
    *1
    No. 3 Parking Brake Cable
    *2
    No. 3 Clip

  1. Remove the 4 bolts, nut and No. 3 parking brake cable.



3. REMOVE LOWER CONTROL ARM ASSEMBLY LH


F049951E01
  1. Remove the nut and bolt from the axle housing.

    HINT:
    While fixing the nut in place, loosen and remove the bolt.



    F052275E01
  1. Remove the nut, bolt and control arm.

    HINT:
    While fixing the nut in place, loosen and remove the bolt.