Home › SUSPENSION & AXLE › SUSPENSION › REAR LATERAL CONTROL ROD

REAR LATERAL CONTROL ROD > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedures for the RH side and LH side.
  2. The procedures listed below are for the LH side.



1. REMOVE REAR LATERAL CONTROL ROD ASSEMBLY


C119246
  1. Remove the nut, 2 bushes and 2 retainers from the control rod.



    C119247
  1. Remove the bolt, nut and lateral control rod.

    HINT:
    While fixing the bolt in place, loosen and remove the nut.