Home › BODY ELECTRICAL › LIGHTING › HEADLIGHT ASSEMBLY (for HID Headlight)

HEADLIGHT ASSEMBLY (for HID Headlight) > DISASSEMBLY

for Preparation Click here


CAUTION:
Make sure that the headlight control ECU sub-assembly LH is not connected or hot before disassembling the headlight control ECU sub-assembly.

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. REMOVE HEADLIGHT CONTROL ECU SUB-ASSEMBLY LH


    E225378
  1. Turn the headlight control ECU sub-assembly LH in the direction indicated by the arrow in the illustration and remove the headlight control ECU sub-assembly LH.

    NOTICE:
    Make sure that the headlight control ECU sub-assembly LH is not connected or hot before removing the headlight control ECU sub-assembly LH.



    E225379
  1. Turn the headlight control ECU sub-assembly LH socket in the direction indicated by the arrow in the illustration and disconnect the headlight control ECU sub-assembly LH socket.

    NOTICE:
    Do not pull the headlight control ECU sub-assembly LH while the socket is connected.



2. REMOVE DISCHARGE HEADLIGHT BULB


    E225380
  1. Release the set spring lock as shown in the illustration and remove the discharge headlight bulb.



3. REMOVE NO. 2 HEADLIGHT BULB


    E225369
  1. Turn the No. 2 headlight bulb in the direction indicated by the arrow in the illustration and remove the No. 2 headlight bulb from the headlight unit LH.



4. REMOVE CLEARANCE LIGHT SOCKET


    E226610
  1. Turn the clearance light socket in the direction indicated by the arrow in the illustration and remove the clearance light socket.



5. REMOVE CLEARANCE LIGHT BULB
  1. Remove the clearance light bulb from the clearance light socket.



6. REMOVE FRONT TURN SIGNAL LIGHT SOCKET


    E225371
  1. Turn the front turn signal light socket in the direction indicated by the arrow in the illustration and remove the front turn signal light socket.



7. REMOVE FRONT TURN SIGNAL LIGHT BULB
  1. Remove the front turn signal light bulb from the front turn signal socket.



8. REMOVE HEADLIGHT BRACKET LH


    E225486
  1. Remove the 2 screws and headlight bracket LH.