Home › BRAKE › BRAKE › FRONT BRAKE (for TMT Made)

FRONT BRAKE (for TMT Made) > INSPECTION

for Preparation Click here



1. CHECK BRAKE CYLINDER AND PISTON
  1. Check the cylinder bore and piston for rust or scoring.
    If necessary, replace the cylinder and piston.



2. CHECK PAD LINING THICKNESS


    F042679
  1. Using a ruler, measure the pad lining thickness.

    Standard thickness:
    11.5 mm (0.453 in.)

    Minimum thickness:
    1.0 mm (0.039 in.)

    If the pad lining thickness is equal to or less than the minimum, replace the pad.



3. CHECK DISC THICKNESS


C111382
  1. Using a micrometer, measure the disc thickness.

    Standard thickness:
    Item
    Specified Condition
    for 15 inch Front Disc Brake
    25.0 mm (0.984 in.)
    for 16 inch Front Disc Brake
    28.0 mm (1.102 in.)

    Minimum thickness:
    Item
    Specified Condition
    for 15 inch Front Disc Brake
    23.0 mm (0.906 in.)
    for 16 inch Front Disc Brake
    26.0 mm (1.024 in.)

    If the disc thickness is less than the minimum, replace the disc.