Home › BRAKE › PARKING BRAKE › PARKING BRAKE LEVER

PARKING BRAKE LEVER > INSTALLATION

for Preparation Click here



1. INSTALL PARKING BRAKE LEVER SUB-ASSEMBLY


    C237685
  1. Install the parking brake switch to the lever with the screw.

  1. Connect the parking brake switch connector.



    C237674
  1. Connect the cable to the lever with the 2 bolts and 2 nuts.

    Torque:
    15 N*m{ 148 kgf*cm , 11 ft.*lbf }



    C237679E01
  1. Return the claw to its original position.
    Text in Illustration 
    *1
    Claw



    C237673
  1. Install the lever with the 2 bolts.

    Torque:
    13 N*m{ 127 kgf*cm , 9 ft.*lbf }



    C237675E01
  1. Install the No. 1 parking brake cable adjusting nut and lock nut.
    Text in Illustration 
    *1
    Lock Nut
    *2
    No. 1 Parking Brake Cable Adjusting Nut

    Torque:
    5.2 N*m{ 53 kgf*cm , 46 in.*lbf }



2. ADJUST PARKING BRAKE
(Click here)


3. INSTALL PARKING BRAKE LEVER COVER


4. INSTALL CONSOLE BOX ASSEMBLY
(Click here)


5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).