Home › BRAKE › PARKING BRAKE › PARKING BRAKE LEVER

PARKING BRAKE LEVER > REMOVAL

for Preparation Click here



1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the after disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



3. REMOVE CONSOLE BOX ASSEMBLY
(Click here)


4. REMOVE PARKING BRAKE LEVER COVER


5. REMOVE PARKING BRAKE LEVER SUB-ASSEMBLY


    C237675E01
  1. Remove the lock nut and No. 1 parking brake cable adjusting nut.
    Text in Illustration 
    *1
    Lock Nut
    *2
    No. 1 Parking Brake Cable Adjusting Nut



    C237673
  1. Remove the 2 bolts and lever (with the No. 1 parking brake cable).



    C237678E01
  1. Bend the claw so that the No. 1 parking brake cable can be removed.
    Text in Illustration 
    *1
    Claw



    C238705
  1. Remove the 2 bolts and 2 nuts.

  1. Disconnect the cable from the lever.



    C237685
  1. Disconnect the parking brake switch connector.

  1. Remove the screw and switch from the lever.