Home
›
ENGINE · 2TR-FE
›
EMISSION CONTROL
›
AIR FUEL RATIO SENSOR (w/ Secondary Air Injection System)
AIR FUEL RATIO SENSOR (w/ Secondary Air Injection System) > INSPECTION
for Preparation
Click here
1. INSPECT AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)
Measure the resistance between terminals 1 (A1A-) and 2 (+B) of the sensor.
Standard resistance:
1.8 to 3.4 Ω at 20°C (68°F)
If the result is not as specified, replace the air fuel ratio sensor.