Home › ENGINE ยท 2TR-FE › EMISSION CONTROL › HEATED OXYGEN SENSOR (w/ Secondary Air Injection System)

HEATED OXYGEN SENSOR (w/ Secondary Air Injection System) > INSTALLATION

for Preparation Click here



1. INSTALL HEATED OXYGEN SENSOR (for 2WD)


    A112121E01
  1. Using SST, install the sensor.

    SST
    09224-00010  

    Torque:
    44 N*m{ 449 kgf*cm , 32 ft.*lbf } for use without SST
    40 N*m{ 408 kgf*cm , 30 ft.*lbf } for use with SST

    HINT:
    Use a torque wrench with a fulcrum length of 30 cm (11.81 in.).



    A112117
  1. Connect the sensor connector.



2. INSTALL HEATED OXYGEN SENSOR (for 4WD)


    A112121E02
  1. Using SST, install the sensor.

    SST
    09224-00010  

    Torque:
    44 N*m{ 449 kgf*cm , 32 ft.*lbf } for use without SST
    40 N*m{ 408 kgf*cm , 30 ft.*lbf } for use with SST

    HINT:
    Use a torque wrench with a fulcrum length of 30 cm (11.81 in.).



    A112094
  1. Attach the wire clamp to the vehicle body.

  1. Connect the sensor connector.