Home › ENGINE ยท 2TR-FE › EMISSION CONTROL › HEATED OXYGEN SENSOR (w/ Secondary Air Injection System)

HEATED OXYGEN SENSOR (w/ Secondary Air Injection System) > REMOVAL

for Preparation Click here


CAUTION:
  1. Wear protective gloves when removing the heated oxygen sensor.
  2. The exhaust pipe assembly is extremely hot immediately after the engine has stopped.
  3. Confirm that the exhaust pipe assembly has cooled down before removing it.



1. REMOVE HEATED OXYGEN SENSOR (for 2WD)


    A112117
  1. Disconnect the sensor connector.



    A112118E01
  1. Using SST, remove the sensor.

    SST
    09224-00010  



2. REMOVE HEATED OXYGEN SENSOR (for 4WD)


    A112094
  1. Disconnect the sensor connector.

  1. Disconnect the sensor wire from the clamp.



    A112120E01
  1. Using SST, remove the sensor.

    SST
    09224-00010