FRONT DOOR LOCK > INSPECTION |
| 1. INSPECT FRONT DOOR LOCK (FOR DRIVER SIDE) |
![]() |
Apply battery voltage to the door lock and check operation of the door lock motor.
| Measurement Condition | Specified Condition |
| Battery positive (+) → Terminal 4 Battery negative (-) → Terminal 1 | Lock |
| Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 4 | Unlock |
![]() |
Measure the resistance of the door lock and unlock switch.
| Tester Connection | Door Lock Condition | Specified Condition |
| 9 - 7 | Lock | Below 1 Ω |
| 9 - 7, 10 - 7 | OFF | 10 kΩ or higher |
| 10 - 7 | Unlock | Below 1 Ω |
| 2. INSPECT FRONT DOOR LOCK (FOR PASSENGER SIDE) |
![]() |
Apply battery voltage to the door lock and check operation of the door lock motor.
| Measurement Condition | Specified Condition |
| Battery positive (+) → Terminal 4 Battery negative (-) → Terminal 1 | Lock |
| Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 4 | Unlock |
| 3. INSPECT POWER WINDOW REGULATOR MASTER SWITCH (DOOR CONTROL SWITCH) |
![]() |
Measure the resistance of the door control switch.
| Tester Connection | Switch Condition | Specified Condition |
| 5 - 3 | Lock | Below 1 Ω |
| 5 - 3, 8- 3 | OFF | 10 kΩ or higher |
| 8 - 3 | Unlock | Below 1 Ω |
| Tester Connection | Switch Condition | Specified Condition |
| 5 - 1 | Lock | Below 1 Ω |
| 5 - 1, 8- 1 | OFF | 10 kΩ or higher |
| 8 - 1 | Unlock | Below 1 Ω |