REAR COOLING UNIT > DISASSEMBLY |
| 1. REMOVE NO. 1 COOLER AIR DUCT |
![]() |
Remove the 3 screws and No. 1 cooler air duct.
| 2. REMOVE BLOWER (REAR) RESISTOR |
Disconnect the connector.
![]() |
Remove the 2 screws and blower (rear) resistor.
| 3. REMOVE NO. 2 COOLER UNIT DRAIN HOSE |
![]() |
Remove the No. 2 cooler unit drain hose.
| 4. REMOVE REAR BLOWER MOTOR WITH FAN SUB-ASSEMBLY |
![]() |
Remove the 3 screws and rear blower motor with fan sub-assembly.
| 5. REMOVE AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY |
![]() |
Remove the 9 screws.
Detach the 3 claws and remove the cooling unit case (motor side).
Remove the evaporator sub-assembly from the cooler unit case (sink side).
![]() |
Using a 4 mm socket hexagon wrench, remove the 2 hexagon bolts and the air conditioning tube and accessory assembly.
Remove the 2 O-rings from the air conditioner tube and accessory assembly.
| 6. REMOVE REAR COOLING UNIT EXPANSION VALVE |
![]() |
Remove the rear cooling unit expansion valve from the evaporator sub-assembly.
Remove the 2 O-rings from the evaporator sub-assembly.