AIR CONDITIONING PANEL (for Automatic Air Conditioning System) > REMOVAL |
| 1. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY |
![]() |
for Manual Air Conditioning System:
Put protective tape around the center instrument cluster finish panel.
| *1 | Protective Tape |
Using a moulding remover, detach the 10 claws and 4 clips.
![]() |
Detach the 4 claws and disconnect the air conditioner control.
Disconnect the connectors and remove the center instrument cluster finish panel.
![]() |
for Automatic Air Conditioning System:
Put protective tape around the center instrument cluster finish panel.
| *1 | Protective Tape |
Using a moulding remover, detach the 8 claws and 4 clips.
Disconnect the connectors and remove the center instrument cluster finish panel.
| 2. REMOVE LOWER HEATER CONTROL BASE |
![]() |
Remove the 4 screws.
![]() |
Remove the 4 screws.
Detach the 3 claws and disconnect the lower heater control base.
| 3. DISCONNECT NO. 1 COOLER WIRE |
![]() |
Disconnect the No. 1 cooler wire as shown in the illustration.
| 4. REMOVE HEATER CONTROL BASE |
![]() |
Detach the 4 claws and remove the heater control base.
| 5. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY |
![]() |
Disconnect the No. 1 cooler wire from the air conditioning amplifier assembly as shown in the illustration.
| *1 | Air Conditioning Amplifier Assembly |
| *2 | No. 1 Cooler Wire |
Remove the air conditioning amplifier assembly.