Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › AIR CONDITIONING PANEL (for Automatic Air Conditioning System)

AIR CONDITIONING PANEL (for Automatic Air Conditioning System) > REMOVAL

for Preparation Click here



1. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


B278367E01


  1. for Manual Air Conditioning System:

    1. Put protective tape around the center instrument cluster finish panel.
      Text in Illustration 
      *1
      Protective Tape

    2. Using a moulding remover, detach the 10 claws and 4 clips.



    3. B278366
    4. Detach the 4 claws and disconnect the air conditioner control.

    5. Disconnect the connectors and remove the center instrument cluster finish panel.



    B278368E01
  1. for Automatic Air Conditioning System:

    1. Put protective tape around the center instrument cluster finish panel.
      Text in Illustration 
      *1
      Protective Tape

    2. Using a moulding remover, detach the 8 claws and 4 clips.

    3. Disconnect the connectors and remove the center instrument cluster finish panel.



2. REMOVE LOWER HEATER CONTROL BASE


    E228137
  1. Remove the 4 screws.



    E228138
  1. Remove the 4 screws.

  1. Detach the 3 claws and disconnect the lower heater control base.



3. DISCONNECT NO. 1 COOLER WIRE


E228139
  1. Disconnect the No. 1 cooler wire as shown in the illustration.



4. REMOVE HEATER CONTROL BASE


    E117019
  1. Detach the 4 claws and remove the heater control base.



5. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY


    E225679E01
  1. Disconnect the No. 1 cooler wire from the air conditioning amplifier assembly as shown in the illustration.
    Text in Illustration 
    *1
    Air Conditioning Amplifier Assembly
    *2
    No. 1 Cooler Wire

  1. Remove the air conditioning amplifier assembly.