Home › SECURITIES › THEFT DETERRENT › ENGINE HOOD COURTESY SWITCH

ENGINE HOOD COURTESY SWITCH > INSPECTION



1. INSPECT HOOD LOCK ASSEMBLY (ENGINE HOOD COURTESY SWITCH)


    E225119E01
  1. Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *a
    Component without harness connected
    (Hood Lock Assembly)
    *b
    Unlock Position
    *c
    Lock Position

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 - 2
    Unlock position
    10 kΩ or higher
    1 - 2
    Lock position
    Below 1 Ω

    If the result is not as specified, replace the hood lock assembly.