Home › BODY ELECTRICAL › AUDIO / VISUAL › WINDOW GLASS ANTENNA WIRE

WINDOW GLASS ANTENNA WIRE > REPAIR

for Preparation Click here



1. REPAIR WINDOW GLASS ANTENNA WIRE


B063722E16
  1. Clean the broken wire tips with grease, wax and silicone remover.

  1. Place masking tape along both sides of the wire to be repaired.

  1. Thoroughly mix the repair agent.

    DuPont paste:
    No. 4817 or equivalent

    Text in Illustration 
    *a
    Repair Point
    *b
    Masking Tape
    *c
    Broken Wire



    B063723E12
  1. Using a fine tip brush, apply a small amount of the agent to the wire.
    Text in Illustration 
    *a
    Fine Tip Brush
    *b
    Repair Point

  1. After a few minutes, remove the masking tape.

    NOTICE:
    Do not allow electricity to flow in the window glass antenna wire for at least 24 hours.