Home › BODY › WINDSHIELD / WINDOWGLASS › DEFOGGER RELAY

DEFOGGER RELAY > ON-VEHICLE INSPECTION

for Preparation Click here



1. REMOVE DEFOGGER RELAY (Marking: DEF)
  1. Remove the defogger relay from the No. 3 relay block.



2. INSPECT DEFOGGER RELAY


B060778E04
  1. Measure the resistance of the relay.

    Standard resistance:
    Tester Connection
    Specified Condition
    3 - 5
    10 kΩ or higher
    Below 1 Ω
    (when battery voltage is applied to terminals 1 and 2)

    If the result is not as specified, replace the relay.



3. INSTALL DEFOGGER RELAY