HEADLIGHT LEVELING SWITCH > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE NO. 1 SWITCH HOLE BASE |
![]() |
Put protective tape around the No. 1 switch hole base.
| *1 | Protective Tape |
Using a moulding remover, detach the 5 claws.
Disconnect the connectors and remove the No. 1 switch hole base.
| 3. REMOVE HEADLIGHT LEVELING SWITCH |
![]() |
Detach the 2 claws and remove the headlight leveling switch.