Home › BODY ELECTRICAL › LIGHTING › BACK DOOR COURTESY SWITCH

BACK DOOR COURTESY SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL BACK DOOR LOCK ASSEMBLY


    B277604E01
  1. Temporarily install the back door lock assembly with the 3 bolts.

  1. Tighten the bolts in the order shown in the illustration.

    Torque:
    15 N*m{ 153 kgf*cm , 11 ft.*lbf }

  1. Attach the back door lock cable assembly.



  1. Connect the clamp and connect the connector.


    B277797E01


    Text in Illustration 
    *1
    Back Door Lock Cable Assembly
    -
    -



2. INSTALL BACK DOOR TRIM BOARD ASSEMBLY
  1. Attach the 16 clips to install the back door trim board.



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


4. PERFORM INITIALIZATION
  1. Perform initialization (Click here).

    NOTICE:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.