Home › ENGINE ยท 1KD-FTV › EMISSION CONTROL › VACUUM SWITCHING VALVE (w/ Glow Plug Controller)

VACUUM SWITCHING VALVE (w/ Glow Plug Controller) > INSTALLATION

for Preparation Click here



1. INSTALL VACUUM SWITCHING VALVE (for EGR Bypass Valve)
  1. Install the vacuum switching valve to the manifold stay with the screw.

    Torque:
    3.5 N*m{ 36 kgf*cm , 31 in.*lbf }



2. INSTALL MANIFOLD STAY WITH VACUUM SWITCHING VALVE
  1. Install the manifold stay with vacuum switching valve with the 2 bolts.

    Torque:
    19 N*m{ 194 kgf*cm , 14 ft.*lbf }



    A258394E01
  1. Connect the connector and 2 No. 2 vacuum transmitting hoses and attach the 2 clamps as shown in the illustration.
    Text in Illustration 
    *1
    No. 2 Vacuum Transmitting Hose
    *2
    White Paint Mark