Home › ENGINE ยท 1KD-FTV › EMISSION CONTROL › VACUUM REGULATING VALVE

VACUUM REGULATING VALVE > INSTALLATION

for Preparation Click here



1. INSTALL ELECTRIC VACUUM REGULATING VALVE ASSEMBLY (for EGR)
  1. w/ EGR Cooler:

    1. Install the electric vacuum regulating valve together with the bracket with the 2 bolts.

      Torque:
      20 N*m{ 204 kgf*cm , 15 ft.*lbf }

    2. Connect the 4 vacuum hoses.

      NOTICE:
      Install the vacuum hoses so that they completely cover the pipes.

    3. Connect the connector.

  1. w/o EGR Cooler:

    1. Install the vacuum switching valve with the screw.

      Torque:
      3.5 N*m{ 36 kgf*cm , 31 in.*lbf }

    2. Install the electric vacuum regulating valve together with the bracket with the 2 bolts.

      Torque:
      20 N*m{ 204 kgf*cm , 15 ft.*lbf }

    3. Connect the 3 vacuum hoses.

    4. Connect the 2 connectors.



2. INSTALL NO. 1 GAS FILTER WITH GAS FILTER BRACKET (w/ EGR Cooler)
  1. Install the No. 1 gas filter with gas filter bracket with the bolt.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }

  1. Connect the 2 vacuum hoses.

    NOTICE:
    Install the vacuum hoses so that they completely cover the pipes.



3. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY
  1. Install the engine cover with the 3 bolts and 2 cap nuts.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }