Home › ENGINE ยท 1KD-FTV › EMISSION CONTROL › VACUUM REGULATING VALVE

VACUUM REGULATING VALVE > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    A211905E01
  1. Remove the 3 bolts, 2 cap nuts and No. 1 engine cover.



2. REMOVE NO. 1 GAS FILTER WITH GAS FILTER BRACKET (w/ EGR Cooler)


    A211909
  1. Disconnect the 2 vacuum hoses.

  1. Remove the bolt and No. 1 gas filter with gas filter bracket.



3. REMOVE ELECTRIC VACUUM REGULATING VALVE ASSEMBLY (for EGR)


  1. w/ EGR Cooler:



      A211910
    1. Disconnect the connector.



    2. A211911
    3. Disconnect the 4 vacuum hoses.



    4. A211912
    5. Remove the 2 bolts and electric vacuum regulating valve with bracket.

      NOTICE:
      Do not remove the electric vacuum regulating valve from the bracket.



  1. w/o EGR Cooler:



      A250417
    1. Disconnect the 2 connectors.

    2. Disconnect the 3 vacuum hoses.

    3. Remove the 2 bolts and electric vacuum regulating valve together with the bracket.

      NOTICE:
      Do not remove the electric vacuum regulating valve from the bracket.



    4. A112098
    5. Remove the screw and vacuum switching valve.