Home › SECURITIES › ENGINE IMMOBILISER › ENGINE IMMOBILISER SYSTEM

DTC    B279C    Theft Deterrent System Presence Detection

for Preparation Click here


DESCRIPTION

If an ECM that is incompatible with the engine immobiliser system is installed, the ECM stores this DTC.

DTC Code
DTC Detection Condition
Trouble Area
B279C
An ECM for vehicles without an engine immobiliser system is installed to a vehicle with an engine immobiliser system.
ECM

INSPECTION PROCEDURE

NOTICE:
When the ECM is replaced, refer to the Service Bulletin.

1.REPLACE CURRENT ECM WITH PROPER ECM
  1. Replace the current ECM with the proper ECM .


NEXT


2.REGISTER ECU COMMUNICATION ID
  1. Register the ECU - ECM communication ID (Refer to the Service Bulletin).


NEXT

END