Home › BODY ELECTRICAL › WIPER AND WASHER › REAR WIPER RUBBER

REAR WIPER RUBBER > REPLACEMENT

for Preparation Click here



1. REMOVE REAR WIPER BLADE ASSEMBLY


    E225760
  1. Raise the wiper arm, and then detach the claw by rotating the wiper blade to the position where a "click" sound" is heard as shown in the illustration.

    NOTICE:
    Be careful not to damage the claw.



    E225949
  1. Pull the wiper blade straight toward the right side of the vehicle to remove it from the wiper arm.

    NOTICE:
    Do not fold the wiper arm with the wiper blade removed. The arm tip may damage the back door glass surface.



2. REMOVE REAR WIPER RUBBER


    E178053E02
  1. Lift and pull the end of the wiper rubber protruding from the blade stopper as shown in the illustration to remove the wiper rubber.
    Text in Illustration 
    *a
    Stopper (Rear End of Blade)
    *b
    Lightly Push (Grip)
    *c
    Lift
    *d
    Pull

    NOTICE:
    Do not forcibly pull out the wiper rubber. The backing plates will be deformed or the blade claws will be damaged.

    HINT:
    Lightly pushing the rubber between the end and middle allows it to be removed more easily.

  1. Remove the 2 wiper rubber backing plates from the wiper rubber.



3. INSTALL REAR WIPER RUBBER


    E178054E02
  1. Install the 2 backing plates as shown in the illustration.
    Text in Illustration 
    *1
    Backing Plate
    *a
    Curved

    NOTICE:
    Install the backing plates so that they are facing in the correct direction.



    E178055E02
  1. Insert the wiper rubber into the front end of the wiper blade and slide it towards the rear end through the second claw.
    Text in Illustration 
    *a
    Second Claw
    *b
    Rear End Claw
    *c
    Rear End Stopper

  1. After pushing the wiper rubber through the rear end claw, allow it to pass over the rear end stopper.



    E178056E01
  1. Slide the wiper rubber through the front end claw.
    Text in Illustration 
    *1
    Front End Claw



4. INSTALL REAR WIPER BLADE ASSEMBLY


    E225761
  1. Push the wiper blade straight toward the left side of the vehicle to attach the claw and install the wiper blade to the wiper arm.

    NOTICE:
    Be careful not to damage the claw.

  1. Close the wiper blade holder.