Home › BODY ELECTRICAL › WIPER AND WASHER › HEADLIGHT CLEANER MOTOR

HEADLIGHT CLEANER MOTOR > REMOVAL

for Preparation Click here



1. REMOVE RADIATOR GRILLE


    B277882
  1. Remove the 2 clips and 2 screws.



    B277883E01
  1. Put protective tape around the radiator grille.
    Text in Illustration 
    *1
    Protective Tape

  1. Detach the 6 claws and remove the radiator grille.



2. REMOVE FOG LIGHT COVER LH (w/ Fog Light)


    B283429E01
  1. Put protective tape around the fog light cover.

  1. Using the screwdriver, detach the 8 claws and remove the fog light cover.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape



3. REMOVE FRONT BUMPER HOLE COVER LH (w/o Fog Light)


    B283515E01
  1. Put protective tape around the front bumper hole cover.

  1. Using the screwdriver, detach the 8 claws and remove the front bumper hole cover.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape



4. REMOVE FOG LIGHT COVER RH (w/ Fog Light)

HINT:
Use the same procedure described for the LH side.



5. REMOVE FRONT BUMPER HOLE COVER RH (w/o Fog Light)

HINT:
Use the same procedure described for the LH side.



6. REMOVE FRONT BUMPER COVER


    B277936
  1. Remove the 6 screws and 3 clips.



    B277938E01
  1. Put protective tape around the front bumper cover.

  1. Remove the 2 screws, 2 bolts and 5 clips.
    Text in Illustration 
    *1
    Protective Tape



    B277939
  1. Detach the 8 claws and remove the front bumper cover.

  1. w/ Headlight Cleaner System:
    Disconnect the headlight cleaner hose, and then drain the washer fluid.

    HINT:
    Use a container to collect the washer fluid.

  1. w/ Fog Light:
    Disconnect the 2 fog light connectors.



7. DRAIN WASHER FLUID
  1. Disconnect the washer hose from the windshield washer motor and pump assembly, and then drain the washer fluid.



8. REMOVE HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY


    E225265
  1. Disconnect the connector.



    E225266
  1. Pull out the motor and pump in the direction indicated by the arrow in the illustration to remove it.