Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › CONDENSER (for 2KD-FTV)

CONDENSER (for 2KD-FTV) > REASSEMBLY

for Preparation Click here



1. INSTALL COOLER DRYER


E184466E01
  1. Using pliers, install a new cooler dryer to the modulator.
    Text in Illustration 
    *1
    Modulator



    E101932
  1. Apply sufficient compressor oil to a new O-ring and the cap fitting surface.

    Compressor oil:
    ND-OIL 8 or equivalent



    E184465
  1. Using a 14 mm straight hexagon wrench, install the cap to the cooler condenser core.

    Torque:
    2.9 N*m{ 30 kgf*cm , 26 in.*lbf }



2. INSTALL NO. 3 COOLER CONDENSER BRACKET
  1. Install the No. 3 cooler condenser bracket with the 2 bolts.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }



3. INSTALL NO. 2 COOLER CONDENSER BRACKET
  1. Install the No. 2 cooler condenser bracket with the 2 bolts.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }



4. INSTALL NO. 1 COOLER CONDENSER BRACKET

HINT:
Use the same procedure for both No. 1 cooler condenser brackets.

  1. Install the No. 1 cooler condenser bracket with the 2 bolts.

    Torque:
    3.9 N*m{ 40 kgf*cm , 35 in.*lbf }