Home › ENGINE ยท 1KD-FTV › FUEL › INJECTOR DRIVER (w/o Glow Plug Controller)

INJECTOR DRIVER (w/o Glow Plug Controller) > REMOVAL

for Preparation Click here



1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, systems need to be initialized after the cable is reconnected (Click here).



3. REMOVE INJECTOR DRIVER


    A231858
  1. Disconnect the 3 connectors.

  1. Remove the 2 bolts and injector driver.



4. REMOVE INJECTOR DRIVER BRACKET


    A224468
  1. Remove the 3 screws and injector driver bracket.