Home › ENGINE ยท 2TR-FBE › FUEL › FUEL PUMP (for Fuel Sub Tank)

FUEL PUMP (for Fuel Sub Tank) > REMOVAL

for Preparation Click here



1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here ).



3. DRAIN FUEL


4. REMOVE NO. 2 FUEL TUBE SUB-ASSEMBLY


    A237771
  1. Disconnect the fuel pump connector.



    A237778
  1. Detach the clamp, and then disconnect the No. 2 fuel tube sub-assembly.

    HINT:
    1. A filter is built into the No. 2 fuel tube.
    2. If the No. 2 fuel tube is clogged, replace it with a new one.



5. REMOVE FUEL PUMP


    A237779
  1. Pull out the fuel pump.



6. REMOVE CHECK VALVE GASKET


    A237780
  1. Remove the check valve gasket.